/
Configuration of sflow from Plexxi switches

Use https://seceonhelp.freshdesk.com/support/login to access updated Knowledge Base Articles, Submit Technical Support Tickets and Review Status of submitted support tickets.

Configuration of sflow from Plexxi switches

Owned by Customer Success & Engineering (Unlicensed)
Last updated: Jan 30, 2023

Overview: 

Plexxi Switch Command Line Interface Guide Release 2.2.1 704-20002-20 Rev 2.0

Integration Process:

Redirecting SFlow Traffic to 192.168.10.12 (say CCE Node)

login as: admin

admin@192.168.10.170's password:plexxi

Plexxi Switch version 2.1.2-rc2

*plexxi> en

Verification:

STEP1: Login to UI >> SYSTEM>> LOGS AND FLOWS COLLECTION STATUS .

STEP 2: >> LOGS AND FLOWS COLLECTION STATUS .

STEP 3: >>Inside SOURCE DEVICE IP, IP will reflect.

Related content

Configuring netflows through command line for Cisco L3 switches
Configuring netflows through command line for Cisco L3 switches
Seceon Public Portal
Read with this
Configuring sflow from HP Switches
Configuring sflow from HP Switches
Seceon Public Portal
More like this
Configuring Statistical packet-based sampling with sFlow
Configuring Statistical packet-based sampling with sFlow
Seceon Public Portal
Read with this
BDCOM SWITCH SFLOW CONFIGURATION
BDCOM SWITCH SFLOW CONFIGURATION
Seceon Public Portal
More like this
Aruba- Adding an sFlow Configuration
Aruba- Adding an sFlow Configuration
Seceon Public Portal
More like this
Conguration of sflow from Dell Force10
Conguration of sflow from Dell Force10
Seceon Public Portal
More like this

Seceon Inc. All rights reserved. https://www.seceon.com