BDCOM SWITCH SFLOW CONFIGURATION

Overview

BDCOM Series is a new-generation smart access switch designed for carrier’s IP MAN and enterprise networks. Based on the new-generation high-performance hardware and BDROS platform, it supports functions such as ACL, QinQ and QoS

Integration Process:

STEP-1

#Login your switch, go to “enable” mode.

SW>enable

SW#

#then go to “config” mode

SW#config

SW_config#

STEP-2

configure sflow, here agent ip is switch ip & collector ip is sflow client ip. “6343” port is used for OpenFlow traffic

SW_config#sflow agent ip 192.168.0.2

SW_config#sflow collector ip 203.54.51.2 6343

STEP-3 

Configure interface, which port traffic is collected by sflow client. First select interface

then write 2 line command, here ingress & egress used for download & upload.

sflow enable ingress sampling-rate 1
sflow enable egress sampling-rate 2500

SW_config#interface TGigaEthernet1/5
description IIG
switchport trunk vlan-allowed 100-250
switchport mode trunk
sflow enable ingress sampling-rate 2500
sflow enable egress sampling-rate 2500

Any question about SFLOW CONFIGURATION please comment .

If you want to know more about sflow you may read this “WIKI”

Verificaton:

STEP1: Login to UI >> SYSTEM>> LOGS AND FLOWS COLLECTION STATUS .

Open

STEP 2: >> LOGS AND FLOWS COLLECTION STATUS .

Open

STEP 3: >>Inside SOURCE DEVICE IP, IP will reflect.

LINK- BDCOM SWITCH SFLOW CONFIGURATION - PollyBD