Configuring SecureXL in Checkpoint Gateway

Overview:

SecureXL is enabled by default and you cannot use SmartDashboard to configure it.

Configuration:

To configure SecureXL:

1. Log in to the CLI on the Security Gateway.

2. Run cpconfig

3. Enter the option that enables or disables SecureXL.

   For example, (9) Disable Check Point SecureXL

4. Enter y and then enter 11.

Note -

Run fwaccel or fwaccel6 to dynamically enable or disable SecureXL acceleration for IPv4 or IPv6 traffic
This setting does not survive reboot or the Security Gateway