Use https://seceonhelp.freshdesk.com/support/login to access updated Knowledge Base Articles, Submit Technical Support Tickets and Review Status of submitted support tickets.
Hardware Specifications Required for Seceon CCE
- Customer Success & Engineering (Unlicensed)
Overview:
This is latest Recommended Hardware specification. For easier understanding, we have calculated the hardware requirements based on the proposed asset and data flow volume.
Please go with these recommendations to have the best experience with all new features added in platform release >7.3 or higher.
Kindly note that requirements listed here are the minimum required for installation. The exact requirement may vary based on the actual load.
System Configuration Requirement
Low Volume | Count |
Critical Devices / Servers | Up to 300 |
Non-Critical Devices / Hosts | Up to 2000 |
Events Per Sec, Flows per Sec | Up to 5000, 7000 |
Seceon Package | CPU Config | Memory DRAM | Disk | Network Interface |
CCE** | > 2.8 GHz CPU ; 4/8 Cores* | 4 GB/ 8 GB >2000 MHz DDR4 /DDR5 | 256/512 GB SSD >150K/50K IOPS | 1 GigE |
Windows Collector | Windows 2012/2016 Server - > 2.8 GHz CPU ; 4/8 Cores* | 4 GB/ 8 GB >2000 MHz DDR4 /DDR5 | 40 GB SSD | 1 GigE |
NetFlow Generator*** | > 2.8 GHz CPU ; 4/8 core* | 4 GB/ 8 GB >2000 MHz DDR4 /DDR5 | 256 GB SSD | 1 GigE x 2 Nos. |
Traffic Analyzer**** | > 2.8 GHz CPU ; 8 Cores* | 16 GB >2000 MHz, DDR4 /DDR5 | 256 GB SSD | 1 GigE x 2 Nos. |
Medium Volume | Count |
Critical Devices / Servers | Up to 800 |
Non-Critical Devices / Hosts | Up to 10000 |
Events Per Sec, Flows per Sec | Up to 12000, 15000 |
Seceon Package | CPU Config | Memory DRAM | Disk | Network Interface |
CCE** | > 2.8 GHz CPU ; 8 Cores* | 8/16 GB RAM >2000 MHz, DDR4 /DDR5 | 512 GB SSD >250K/150K IOPS | 1 GigE |
Windows Collector | Windows 2012/2016 Server - >2.8 GHz CPU ; 4/8 Cores* | 4/ 8 GB RAM >2000 MHz, DDR4 /DDR5 | 40 GB SSD | 1 GigE |
NetFlow Generator*** | > 2.8 GHz CPU; 4/8 Core* | 4/8 GB RAM >2000 MHz, DDR4 /DDR5 | 256 GB SSD | 1 GigE x 2 Nos. |
Traffic Analyzer**** | > 2.8 GHz CPU ; 8 Cores* | 16 GB >2000 MHz, DDR4 /DDR5 | 256 GB SSD | 1 GigE x 2 Nos. |
High Volume | Count |
Critical Devices / Servers | Up to 2000 |
Non-Critical Devices / Hosts | Up to 25000 |
Events Per Sec, Flows per Sec | Up to 20000, 25000 |
Seceon Package | CPU Config | Memory DRAM | Disk | Network Interface |
CCE** | > 2.8 GHz CPU ; 16 Cores* | 16 GB RAM >2000 MHz, DDR4 /DDR5 | 512 GB SSD >400K/150K IOPS | 1 GigE |
Windows Collector | Windows 2012/2016 Server - >2.8 GHz CPU ; 4/8 Cores* | 8 GB RAM >2000 MHz, DDR4 /DDR5 | 80 GB SSD | 1 GigE |
NetFlow Generator*** | > 2.8 GHz CPU ; 4/8 core* | 4 /8 GB RAM >2000 MHz, DDR4 /DDR5 | 256 GB SSD | 1 GigE x 2 Nos. |
Traffic Analyzer**** | > 2.8 GHz CPU ; 16 Cores* | 32 GB RAM>2000 MHz, DDR4 /DDR5 | 256 GB SSD | 1 GigE x 2 Nos. |
NOTE :
IP requirements - One IPv4 internal routable IP address must be a static IP Address.
*Cores represent total vCPUs in the VM environment and threads on a Hardware Appliance.
e.g. 8-core dual-CPU Appliance with hyper-threading will represent 2*8*2 = 32 threads.
**Based on the volume and the infrastructure architecture additional CCEs may be needed.
Netflow Generator can be run on CCE or as a standalone. When run along with CCE, hardware requirements for CCE should be increased to accommodate Netflow Generator configuration
Traffic Analyzer can be added for raw traffic analysis on the span/mirror port.
For 1Gbps > 4c/8GB DRAM/128GB SSD and for 10 Gbps > 16c/32GB DRAM/256GB SSD required
VM Environments supported: VMWare vSphere (ESXi) 5.5 or later.
AWS, Azure, GCP, and OCP native deployment supported
Seceon Inc. All rights reserved. https://www.seceon.com