Overview

OVA Development

Pre-Requisite

1. Download the CCE-OVA package on your local laptop.

2. Keep the network details, IP address, Gateway, and netmask, ready with you to be allotted to the VM.

3. Keep the APE IP, and SSH Port available with you, for CCE reprovisioning.

OVA Deployment Steps

Step 1: OVA is deployed using VMware vSphere Client.

Step2: Download ova from the dropbox link provides by seceon

Step 3: In vSphere Client, go to File > Deploy OVF Template and browse to the current location of the ova.

Step 4: Press Next and give the new VM a name.

Step 6: Choose an appropriate data store for the VM having sufficient space.

Step 7: Select Thin Provision disk format for the virtual disk.

Step 8: Select Power on after deployment checkbox.

Step 9: Finish deploying the VM.

Step 10: Once VM is up and running, open the VM with putty.

Step11: Login as username-root, password-section.
Step 12: On the first login, you will be forced to change the password. Make sure to keep the password safe with you.

Step13: Change the network settings using these steps:

Step14: Now, login to the VM as a “seceon” user, and get inside the seceon cce package.

Step15: From inside the CCE package, run ./setup.sh -p

Step16: Step14, will ask you for user inputs, to confirm if you want to change the configuration, say yes

Step 17: Choose the SSH Tunnel option to be changed, and enter your APE IP and tenant ID. With that confirm the inputs, and await the reprovisioning to get over. It may take around 5-7 minutes.

Step 17: With all of it in place, check in the UI(opened with the APE IP), under System menu> Log/Flow Collection Status, and ensure that the CCE VM IP is being reflected.

Verification