Overview

We are providing you with the steps to integrate your Darktrace with Seceon SIEM so One can have Comprehensive visibility and Proactive Threat Detection in your Environment. There will be a log transfer between your firewall to APE(Analytics and Policy Engine) via CCE (Collection and Control Engine ). In this document, we are guiding you through the steps for Log forwarding.

Steps Of Configuration

1. Log in to Darktrace interface;

2. Expand top left menu and select Admin, a second menu appears;

3. Select System Config page

1. In Alerting section, click on Verify Alert Settings

2. In JSON Syslog Alerts, set field to True

3. Set syslog server to CCE Server’s IP address

4. Set a port 514 UDP to use with the CQ event source

5. Set JSON Syslog TCP Alerts to True

Ref link: https://docs.rapid7.com/insightidr/darktrace/

VERIFICATION OF CONFIGURATION

Verification can be done either from CCE Server or from UI.

Using UI

STEP 1: Log in to UI >> SYSTEM

STEP 2: >> LOGS AND FLOWS COLLECTION STATUS.

STEP 3: >>Inside SOURCE DEVICE IP, IP will reflect.

Using CCE SERVER

“sudo tcpdump -i any host 514 and host <IP address> -AAA” command should be running on the CCE server to check whether or not we are getting logs.