Overview
Steps of Configuration
Step1:
Put the following inputs:
Device IP:
Port:
Name: Could be anything
Domain: Not required
Username:
Password:
Confirm Password:
Note: User should having admin privilege
Now click on Save.
Step2: Now we need to allow API Access.
Turn on API configuration and allow API access from the administrator's IP address. You also allow access to the administrative services of Sophos Firewall.
Go to Backup and firmware > API.
Select API configuration.
For Allowed IP address, enter the CCE IP address where cce remediation container is running.
Click Apply.
The following image shows an example of how to configure the settings:
Verification
Now click on left arrow and expend it
Click on Test connection
Test Connection should show connection Successful like below SS
Now Click on Check Device Status
If Outcome shows Success it means remediator has been setup successfully.
Done!