Use https://seceonhelp.freshdesk.com/support/login to access updated Knowledge Base Articles, Submit Technical Support Tickets and Review Status of submitted support tickets.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »


  1. Enable Traffic-Flow on the router as:

[admin@MikroTik] ip traffic-flow> set enabled=yes
[admin@MikroTik] ip traffic-flow> print
                enabled: yes
             interfaces: all
          cache-entries: 1k
    active-flow-timeout: 30m
  inactive-flow-timeout: 15s
[admin@MikroTik] ip traffic-flow>

2. Specify IP address and port of the host, which will receive Traffic-Flow packets:

[admin@MikroTik] ip traffic-flow target> add dst-address=192.168.0.2 port=2055 version=9
[admin@MikroTik] ip traffic-flow target> print
Flags: X - disabled 
 #   SRC-ADDRESS       DST-ADDRESS        PORT     VERSION
 0   0.0.0.0           192.168.0.2        2055     9  
[admin@MikroTik] ip traffic-flow target>

Now the router starts to send packets with Traffic-Flow information.


Please refer guide: https://wiki.mikrotik.com/wiki/Manual:IP/Traffic_Flow

  • No labels

Seceon Inc. All rights reserved. https://www.seceon.com