Use https://seceonhelp.freshdesk.com/support/login to access updated Knowledge Base Articles, Submit Technical Support Tickets and Review Status of submitted support tickets.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Overview

Microsoft Internet Information Server supports several logging formats. This chapter provides information about configuring IIS logging and NXLog collection. The recommended W3C format is documented below as other supported IIS formats.

Configure Nxlog on the IIS server

  1. Download the latest version of nxlog. It is easiest to choose the Windows MSI file which includes an installer.

http://nxlog.org/products/nxlog-community-edition/download

3. Open the Nxlog configuration file at:

        C:\Program Files (x86)\nxlog\conf\nxlog.conf

4. Replace the entire configuration file by pasting the following Below – Note to replace the variable ({IP address of Seceon Server}) with the actual Seceon Server IP address:

define ROOT C:\Program Files (x86)\nxlog

Moduledir %ROOT%\modules
CacheDir %ROOT%\data
Pidfile %ROOT%\data\nxlog.pid
SpoolDir %ROOT%\data
LogFile %ROOT%\data\nxlog.log


<Extension syslog>
Module xm_syslog
</Extension>


<Input in_iis>
Module im_file
File "C:\\inetpub\\logs\\LogFiles\\W3SVC*\u_ex*"
SavePos TRUE
ReadFromLast TRUE
Exec if $raw_event =~ /^#/ drop();
Exec $Message = $raw_event;
</Input>

<Output out_iis>
Module om_udp
Host CCE_IP_ADDRESS
Port 514
Exec $SyslogFacilityValue = 2;
Exec $SourceName = 'windows_iis_logs';
Exec to_syslog_bsd();
</Output>


<Route in-to-out>
Path in_iis => out_iis
</Route>

5.Restart nxlog services.


Enable Logging on the IIS server

IIS logging can be configured at the site or service levels. For more detailed information, see Configure Logging in IIS on Microsoft Docs.

  1. Open IIS Manager, which can be accessed from the Tools menu in the Server Manager or from Administrative Tools.

  2. In the Connections the pane on the left, select the server or site for which to configure logging. Select a server to configure logging server-wide, or a site to configure logging for that specific site.

  3. Double-click the Logging the icon in the centre pane.

Logging icon selected


4. Modify the logging configuration as required. The W3C format is recommended.

Logging configuration options

The resulting logs can be collected by NXLog as shown in the following sections.

Source: https://stackify.com/how-to-interpret-iis-logs/

  • No labels