Use https://seceonhelp.freshdesk.com/support/login to access updated Knowledge Base Articles, Submit Technical Support Tickets and Review Status of submitted support tickets.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »


SecureXL is enabled by default and you cannot use SmartDashboard to configure it.
To configure SecureXL:
  1. Log in to the CLI on the Security Gateway.
  2. Run cpconfig
  3. Enter the option that enables or disables SecureXL.
    For example, (9) Disable Check Point SecureXL
  4. Enter y and then enter 11.

Note -
Run fwaccel or fwaccel6 to dynamically enable or disable SecureXL acceleration for IPv4 or IPv6 traffic
This setting does not survive reboot or the Security Gateway
  • No labels

Seceon Inc. All rights reserved. https://www.seceon.com