The following configuration enables sFlow monitoring of all interfaces on a Brocade (formerly Foundry) FGS switch, sampling packets at 1-in-512, polling counters every 30 seconds and sending the sFlow to an analyzer (CCE-IP) on UDP port 6343 (the default sFlow port)
fgs(config)# int e 0/1/1 to 0/1/24 fgs(config-mif-0/1/1-0/1/24)# sflow forwarding fgs(config-mif-0/1/1-0/1/24)# exit fgs(config)# sflow destination CCE-IP 6343 fgs(config)# sflow sample 512 fgs(config)# sflow polling-interval 30 fgs(config)# sflow enable |
You can also use the following command to list the configuration settings:
fgs# show sflow |