NXLOG is used to process the collected information and send it on to the OTM CCE.
Login on collector/AD computer.
Download the latest version of nxlog. It is easiest to choose the Windows msi file which includes an installer. Use the link below:
http://nxlog.org/products/nxlog-community-edition/download
Open the Nxlog configuration file at:
C:\Program Files (x86)\nxlog\conf\nxlog.conf
Replace the entire configuration file by pasting the following Below – Note to replace the variable (IP Address of Seceon Collector) with the actual Seceon Server IP address:
## This is a sample configuration file. See the nxlog reference manual about the
## configuration options. It should be installed locally and is also available
## online at http://nxlog.org/docs/
## Please set the ROOT to the folder your nxlog was installed into,
## otherwise it will not start.
#define ROOT C:\Program Files\nxlog
define ROOT C:\Program Files (x86)\nxlog
Moduledir %ROOT%\modules
CacheDir %ROOT%\data
Pidfile %ROOT%\data\nxlog.pid
SpoolDir %ROOT%\data
LogFile %ROOT%\data\nxlog.log
<Extension _json>
Module xm_json
</Extension>
define aisiem \
1, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 17, 18,19, 20, 21, 104, 258, 259, 260, \
261, 262, 500, 517, 520, 528, 529, 530, 531, 532, 533, 534, 535, 536, 537, 538, 539,\
540, 551, 552, 565, 600, 608, 609, 621, 622, 626, 627, 628, 629, 630, 636, 642, 644,\
645, 647, 632, 663, 664, 671, 673, 675, 676, 677, 679, 680, 681, 682, 683, 684, 689,\
690, 692, 1001, 1006, 1007, 1008, 1015, 1102, 1116, 1117, 1118, 1119, 2003, 2100, \
7034, 4624, 4625, 4634, 4647, 4649, 4656, 4657, 4659, 4661, 4663, 4670, 4688, 4697, \
4704, 4705, 4717, 4718, 4720, 4722, 4723, 4724, 4725, 4726, 4727, 4728, 4729, 4730, \
4731, 4732, 4733, 4734, 4735, 4737, 4738, 4739, 4740, 4741, 4742, 4743, 4744, 4745, \
4746, 4747, 4748, 4749, 4750, 4751, 4752, 4753, 4754, 4755, 4756, 4757, 4758, 4759, \
4760, 4761, 4762, 4763, 4764, 4767, 4769, 4771, 4772, 4773, 4775, 4776, 4777, 4778, \
4779, 4780, 4782, 4783, 4784, 4785, 4786, 4787, 4788, 4789, 4790, 4791, 4793, 4794, \
4797, 4798, 4800, 4801, 4802, 4803, 5001, 5004, 5007, 5010, 5012, 5136, 5137, 5140, \
5141, 5142, 5143, 5144, 5145, 5376, 5377, 7045, 8003, 8004, 8007, 64004
<Extension syslog>
Module xm_syslog
</Extension>
<Input in>
Module im_msvistalog
Query <QueryList>\
<Query Id="0">\
<Select Path="Security">* </Select>\
<Select Path="Application">* </Select>\
<Select Path="Setup">* </Select>\
<Select Path="System">* </Select>\
</Query>\
</QueryList>
<Exec>
if ($EventID NOT IN (%aisiem%)) drop();
</Exec>
</Input>
<Input DNS_In>
Module im_file
File "C:\\Windows\\Sysnative\\dns\dns*"'
SavePos TRUE
InputType LineBased
Exec if $raw_event =~ /^#/ drop();
Exec $Message = $raw_event;
</Input>
<Output out>
Module om_udp
Host CCE_IP_ADDRESS
Port 5154
Exec to_json();
</Output>
<Output DNS_Out>
Module om_udp
Host CCE_IP_ADDRESS
Port 514
Exec $SyslogFacilityValue = 2;
Exec $SourceName = 'windows_dns_logs';
Exec to_syslog_bsd();
</Output>
<Route 1>
Path in => out
</Route>
<Route DNS>
Path DNS_In => DNS_Out
</Route>
Note . 1 For Windows Events
Restart nxlog from services or type the following at an elevated command prompt:
net stop nxlog
net start nxlog
Enable audit logs: Windows- Enable Audit Logs/Policies
Note . 2 For DNS Events
To enable DNS diagnostic logging
Open the DNS Manager with the following command:
dnsmgmt.msc
1.Right-click the DNS server and click Properties.
2.Click the Debug Logging tab.
3.Select Log packets for debugging.
4.In the log file, type the file path and name, and the maximum size
