| Table of Contents |
|---|
...
Reference: https://www.flowtraq.com/configuring-flexible-netflow-export-cisco-routers/
Verification:
STEP1: Login to UI >> SYSTEM>> LOGS AND FLOWS COLLECTION STATUS .
...
STEP 2: >> LOGS AND FLOWS COLLECTION STATUS .
...
STEP 3: >>Inside SOURCE DEVICE IP, IP will reflect.
...
| Code Block |
|---|
Switch(config)# flow exporter export1 Switch(config-flow-exporter)# destination 10.0.101.254 Switch(config-flow-exporter)# transport udp 20559995 Switch(config-flow-exporter)# template data timeout 60 Switch(config-flow-exporter)# exit Switch(config)# flow record record1 Switch(config-flow-record)# match ipv4 source address Switch(config-flow-record)# match ipv4 destination address Switch(config-flow-record)# match ipv4 protocol Switch(config-flow-record)# match transport source-port Switch(config-flow-record)# match transport destination-port Switch(config-flow-record)# collect counter bytes long Switch(config-flow-record)# collect counter packets long Switch(config-flow-record)# collect timestamp sys-uptime first Switch(config-flow-record)# collect timestamp sys-uptime last Switch(config-flow-record)# exit Switch(config)# sampler SampleTest Switch(config-sampler)# mode random 1 out-of 100 Switch(config-sampler)# exit Switch(config)# flow monitor monitor1 Switch(config-flow-monitor)# cache timeout active 300 Switch(config-flow-monitor)# cache timeout inactive 120 Switch(config-flow-monitor)# record record1 Switch(config-flow-monitor)# exporter export1 Switch(config-flow-monitor)# exit Switch(config)# interface GigabitEthernet1/0/1 Switch(config-if)# ip flow monitor monitor1 sampler SampleTest input Switch(config-if)# end |
Add label