Overview

This Documents will help you, how to install CCE .

Pre Requisites

• Ensure that the hardware configuration for CCE is compliant with the specification. Please refer to the https://seceon.atlassian.net/l/c/8zTLvZk1 to see the hardware specification.

• You need VM or Baremetal, with the required hardware configuration with Seceon customized Rocky Linux. Please refer to the link for VM (One can use any of the standard VM environments like Oracle VM Virtual Box, VM ware Fusion (for MAC users), etc. and https://seceon.atlassian.net/l/c/YG1y0941 for Baremetal to see the instructions.

• Ensure that the required ports are opened for the CCE to work properly. Required ports that should be opened are mentioned in the link https://seceon.atlassian.net/l/c/XVw9Fw04.

...

• nproc (To check no of CPU Core, should be 4 cores and need to increase the Power to 2 Only i.e 4 Core / 8 Core)

• free -h (To check memory, should be 4GB )

• df -h (To check the disk size, should be 250GB SSD )

• otmdoc -p (To check IOPS of the Storage Disk)

• otmdoc -y (Disk must preferred to be SSD)

Installation Steps

...

[seceon@localhost ~]$ ./install.sh -c
Is CCE and APE co exist ? Please confirm (yes/no): no
Please provide tenant id for CCE installation :  [Enter the tenant ID applicable for your install, for an enterprise installation]
Do you want secure communication between CCE and APE using SSH tunnel ?  Please confirm (yes/no): yes/no
What is the Public IP Address of APE ?: 
[Enter the IP of the APE over which the CCE can communicate to it]
Which Port you want to use[22] ?:
[Enter the port for the CCE to connect to the APE over SSH]
id_rsa
What is the Hostname of APE[Seceon-OTM] ? : [Hit Enter]

You configured following information: 
Tenant id for CCE installation : Your tenant ID
CCE and APE co exist : no/yes
APE IP Address : Your APE's IP address
APE Hostname : Seceon-OTM
Secure communication between CCE and APE using SSH tunnel : yes or no, as appl
SSH tunnel Port : Your configured port
Please confirm (yes/no): 

CCE installation started...... will take arround 15-20 minutes

As the installation, proceeds, you will be able to see the progress bar. Once this gets over, you will see a success message confirming the completion.

...

• Command to be run as “seceon” user

1. $ otmdoc -m

Expected Output

...

2. ps -aef | grep tunnel

Expected output:

...

Note: Each of these services, represents a necessary CCE module running inside the docker container.

...