Overview
We are providing you the steps to integrate your Vmware Esxi/Vsphere with Seceon SIEM so that you can have Comprehensive visibility and Proactive Threat Detection in your Environment. There will be a log transfer between your firewall to CCE (Collection and Control Engine ). In this document, we are guiding you through the steps for Netflows and Syslog forwarding.
Procedure :
- From the object navigator select “Esxi host” that you want to configure and click the “Manage” tab.
2.On the Settings tab, click “Advanced System Settings”
3.Locate the Syslog.global.logHost property and click the “Edit” icon.
4.Modify the Syslog.global.logHost property to point to the Log Insight IP address or host name and click
5.The format is tcp|udp|ssl://log_insight-host:514|1514, where log_insight-hostis the IP address or host name of the Log Insight virtual appliance. Next steps to be followed are:
NOTE : Use port 514 for UDP and TCP communication, and port 1514 for SSL protocol.
1. Verify that Firewall is not blocking the communication ports.
2. On the Settings tab, click Security Profile, and verify that syslog appears in the Outgoing Connections list.
3. If you do not see syslog in the Outgoing Connections list, click Edit on the upper right.
4. On the list of services, scroll down to locate the syslog service, and select the syslog check box.
5. Click OK
VERIFICATION OF CONFIGURATION
Verification can be done either from CCE Server or from UI.
Using UI
STEP 1: Log in to UI >> SYSTEM
STEP 2: >> LOGS AND FLOWS COLLECTION STATUS.
STEP 3: >>Inside SOURCE DEVICE IP, IP will reflect.
Using CCE SERVER
“sudo tcpdump -i any host 514 (for logs) and 9995 (for flows) and host <IP address> -AAA” command should be running on the CCE server to check whether or not we are getting logs.