...
Step 4. Select Rocky Linux from Choose an Image section, that is marked in red rectangular box as Rocky Linux 8.6.
...
Step 5. Choose a plan, click here Basic.
...
Step 6. Select 320GB 250 GB for CCE installation.
...
Step 7. Click on Add block Storage, and then click on add volume
...
Step 13. Now, after creating a project click on Droplets from left tab, then similar interface will open, and after some time
...
Verification
Step 14. On the right top corner a message Droplet has been created will populate through this way we can verify that the VM is crated.
...
Step 16. Now login on VM using putty as root user
Seceon Server Setup
...
Once VM is created - login as root
Case 1: Do not have internet connection then click on this link https://seceon.atlassian.net/wiki/spaces/SPP/pages/2820866049/Rocky+Linux+-+APE+and+CCE+installation+using+Dropbox#Seceon-Server-Setup-using-Dropbox:
Case 2: Internet connection is available on server then run below command:
...
Login as user/password - seceon/seceon using Putty.
Now download CCE package and installusing below documentsinstruction:
Step 1.Login on PUTTY as a “seceon” user, ensure the path is “/home/seceon” (cross-verify by “pwd” command) and download the package using the Seceon Latest Package Download Link if the CCE server has internet connectivity.
Step 2.If the server does not own internet then, first download the package, and transfer the package, via WinSCP in /home/seceon path to the server.
Step 3.To ensure that you are settled with the correct CCE package, cross-verify the legitimacy by md5checksum “md5sum <downloaded seceon ape link>”
Step 4. Put the server in “screen” mode, so that the installation should not stop even if the system shuts down ( this step is optional though important ).
Step 5.The “screen “ command should be run and then enter.
Step 6. Finally, run the command ./install.sh -a for installation to proceed.
(Installation will take around 15 Mins / 30 Minutes i.e. depending on the hardware specs to Complete )