Pre Requisites

1. Ensure that the hardware configuration for CCE is compliant with the specification. Please refer to the https://seceon.atlassian.net/l/c/8zTLvZk1 to see the hardware specification.

2. You need VM or Baremetal, with the required hardware configuration with Seceon customized Rocky Linux. Please refer to the link for VM https://seceon.atlassian.net/l/c/41tR05g5 and https://seceon.atlassian.net/l/c/YG1y0941 for Baremetal to see the instructions.

3. Ensure that the required ports are opened for the CCE to work properly. Required ports that should be opened are mentioned in the link https://seceon.atlassian.net/l/c/XVw9Fw04.

...

As the installation, proceeds, you will be able to see the progress bar. Once this gets over, you will see a success message confirming the completion.

...

Verification of the CCE installation

On the CCE machine, logged in as “ seceon “ and verify with the following:

• Command to be run as “seceon” user

1. $ otmdoc -m

Expected Output

• Image Modified

2. ps -aef|grep tunnel

Expected output:

...

Note: Each of these services, represents a necessary CCE module running inside the docker container.

Verification from UI:

Navigate to “Log/Flow Collection Status” under Setting/System and check CCE IP will reflect there:

...

Need Help & Support?

Please send us an email at support@seceon.com, in case of any issues or questions.

...