| Table of Contents |
|---|
...
VM Creation on Oracle Virtual Box
You need to install virtual box on your windows server:
Step 1: Open Oracle VM VirtualBox Manager
...
Step 11: Now click on storage -->Empty -->Disk symbol and choose seceon iso-(Rocky Linux) >OK
...
Step 12: In Network option, NAT should be selected.
...
Ensure that the “INSTALLATION DESTINATION” under the “SYSTEM” is “Custom partitioning selected” as shown in the figure below:
...
Rocky Linux Installation- Seceon Setup-Installation Destination
Rocky Linux Installation- Installation Destination-Kickstart Insufficient
STEP 4: Network & Host Name Setting
Scrolling down in the same screen, choose the option “NETWORK & HOST NAME” as shown in the figure below:
...
Network & Host Name
For Manual Configuration using a Static IP: Put the Ethernet Connection as “OFF” as it has to be configured and then switched on.
...
To start the process, Click “Begin Installation” as shown in figure below:
...
Begin Installation
Please note that Installation Details remain as Custom Partitioned (Unlike the Installing Rocky Linux with Minimal setup).
...
As the User clicks on “Begin Installation”, it takes to a screen as shown in the figure below:
...
User Settings
On selecting the “ROOT PASSWORD” option, the User will get into a screen as shown below:
...
Root Password
It will require the user to enter a confidential Root Password; confirm it and then click
...
After the complete installation as shown in the figure below, click on “Reboot”
...
Installation Complete
STEP 8: Log in to the machine
Now, the VM/server is up with Seceon Rocky Linux ISO. Login to the server/VM using the credentials “seceon/seceon” and follow the instruction.
Installation of CCE
/wiki/spaces/PP/pages/2946793473
...