| Table of Contents |
|---|
...
VM Creation on Oracle Virtual Box
Step1Step 1: Open Oracle VM VirtualBox Manager
...
Step2Step 2: Click On Machine-->New
...
Step3Step 3: Put the VM Name, Type and Version respectively.
...
Step4Step 4: Click next and select memory size
...
Step5Step 5: Click Next Create Virtual Hard Disk
...
Step6Step 6: Hard disk file type VDI
...
Step7Step 7: Click Next Storage on physical hard disk “Dynamically allocated“
...
Step8Step 8: Select file location and size
...
Step9Step 9: Click on create
...
Step10. : Right click on your VM and click on setting option
...
Step 11: Now click on storage -->Empty -->Disk symbol and choose seceon iso-(Rocky Linux) >OK
...
Step8Step 12: In Network option NAT should be selected.
...
Step9Step13: Click on Start
...
Server Setup (Rocky Linux)
STEP 1: Select option 1 “ Install Rocky Linux 8”
...
Step 2: Select Language
...
STEP 3: Installation Destination:
Ensure that the “INSTALLATION DESTINATION” under the “SYSTEM” is “Custom partitioning selected” as shown in the figure below:
...
Rocky Linux Installation- Seceon Setup-Installation Destination
Rocky Linux Installation- Installation Destination-Kickstart Insufficient
STEP 4: Network & Host Name Setting:
Scrolling down in the same screen, choose the option “NETWORK & HOST NAME” as shown in the figure below:
...
Network & Host Name
For Manual Configuration using a Static IP: Put the Ethernet Connection as “OFF” as it has to be configured and then switched on.
...
Click “Done” from the top left corner as shown in the figure below.
STEP 5: Begin Installation
To start the process, Click “Begin Installation” as shown in figure below:
...
Begin Installation
Please note that Installation Details remains as Custom Partitioned (Unlike the Installing Rocky Linux with Minimal setup).
STEP 6: Create Root User
As the User clicks on “Begin Installation”, it takes to a screen as shown in the figure below:
...
User Settings
On selecting the “ROOT PASSWORD” option, User will get into a screen as shown below:
...
Root Password
It will require the user to enter a confidential Root Password; confirm it and then click
...
By default the ISO has user “seceon”.
STEP 7: Reboot
After the complete installation as shown in the figure below, click on “Reboot”
...
Installation Complete
STEP 8: Login to the machine
Now, the VM/server is up with Seceon Rocky Linux ISO. Login to the server/VM using the credentials “seceon/seceon” and follow the instruction.
...