| Table of Contents |
|---|
Overview
NXLOG is used to process the collected information from Windows event logs and forward these logs to the OTM CCE.
...
Ref. link: https://docs.nxlog.co/userguide/configure/overview.html
Pre-requisite
Login on collector/AD computer.
Download the latest version of nxlog. It is easiest to choose the Windows msi file which includes an installer. Use the link below for the community edition:
http://nxlog.org/products/nxlog-community-edition/download
...
Steps Of Configuration
Open the Nxlog configuration file at :
...
Run notepad or notepad++ with the administrative rights.
Open the nxlog.conf file.
Replace the configuration file by pasting the following - Note to replace the variable (
IP Address of Seceon Collector) mentioned in point 52 below with the actual Seceon Server IP address:
...
Enable audit logs: Windows- Enable Audit Logs/Policies
Open Command Prompt, once policies are enabled, and run the command gpupdate /force, to validate that the policies are enabled.
...
Verification
Can validate the success of configuration either on UI or on CCE server.
...