Page Comparison

...

        C:\Program Files (x86)\nxlog\conf\nxlog.conf

4. Replace the entire configuration file by pasting the following Below – Note to replace the variable ({IP address of Seceon Server}) with the actual Seceon Server IP address:

define ROOT C:\Program Files (x86)\nxlog

Moduledir %ROOT%\modules
CacheDir %ROOT%\data
Pidfile %ROOT%\data\nxlog.pid
SpoolDir %ROOT%\data
LogFile %ROOT%\data\nxlog.log

<Extension syslog>
Module xm_syslog
</Extension>


<Input in_iis>
Module im_file
File "C:\\inetpub\\logs\\LogFiles\\W3SVC*\u_ex*"
SavePos TRUE
ReadFromLast TRUE
Exec if $raw_event =~ /^#/ drop();
Exec $Message = $raw_event;
</Input>

<Output out_iis>
Module om_udp
Host CCE_IP_ADDRESS
Port 514
Exec $SyslogFacilityValue = 2;
Exec $SourceName = 'windows_iis_logs';
Exec to_syslog_bsd();
</Output>

<Route in-to-out>
Path in_iis => out_iis
</Route>

5.Restart nxlog services.

Enable Logging on the IIS server

...

1. Open IIS Manager, which can be accessed from the Tools menu in the Server Manager or from Administrative Tools.

2. In the Connections, the pane on the left, select the server or site for which to configure logging. Select a server to configure logging server-wide, or a site to configure logging for that specific site.

3. Double-click the Logging icon in the centre pane.

...

4. Modify the logging configuration as required. The W3C format is recommended.

...

The resulting logs can be collected by NXLog as shown in the following sections.

Verification

Can validate the success of configuration either on UI or on CCE server.

...