| Table of Contents |
|---|
...
C:\Program Files (x86)\nxlog\conf\nxlog.conf
4. Replace the entire configuration file by pasting the following Below – Note to replace the variable ({IP address of Seceon Server}) with the actual Seceon Server IP address:
define ROOT C:\Program Files (x86)\nxlogModuledir %ROOT%\modulesCacheDir %ROOT%\dataPidfile %ROOT%\data\nxlog.pidSpoolDir %ROOT%\dataLogFile %ROOT%\data\nxlog.log
...
Open IIS Manager, which can be accessed from the Tools menu in the Server Manager or from Administrative Tools.
In the Connections, the pane on the left, select the server or site for which to configure logging. Select a server to configure logging server-wide, or a site to configure logging for that specific site.
Double-click the Logging icon in the centre pane.
...
4. Modify the logging configuration as required. The W3C format is recommended.
...
The resulting logs can be collected by NXLog as shown in the following sections.
Verification
Verification steps on Windows server using NXLOG Utility
When issues arise while configuring or maintaining an NXLog instance, a stepwise troubleshooting approach (moving from the most likely and simple cases to the more complex and rare ones) generally yields favourable results. The first step is always to inspect the internal log which NXLog generates.
By default, NXLog generates log messages about its own operations. These messages are essential for troubleshooting problems and should be checked first if NXLog is not functioning as expected.
These internal messages are written to the file defined in the LogFile directive in nxlog.conf. On Windows that file is C:\Program Files\nxlog\data\nxlog.log; on Linux, /opt/nxlog/var/log/nxlog/nxlog.log.
If this directive is not specified, internal logging is disabled.
Verification steps on Seceon devices end
This Can validate the success of configuration either on Seceon UI or on the CCE server.
Verification through the Seceon UI
Open Seceon UI >>Systems >> Dropdown systems and go inside logs and flows collection status.
Under the Source device IP address section the device configured will reflect.
...